CustomButton state not reflected to Editor (Synchro on)

Discuss problems and solutions.
Post Reply
docam
Newbie
Posts:10
Joined:04 Feb 2017 18:39
Location:Chartres, France
CustomButton state not reflected to Editor (Synchro on)

Post by docam » 09 Feb 2017 00:56

Hi,

I'll try as possible to explain my problem.

- Lemur iOS v5.3.2 on iPad 3 (iOS v9.3.5), restarted first to be sure.
- PC Windows 7 Pro SP1 x64, running loopMIDI v1.0.13 (24), Lemur Daemon & Editor v5.3.2.
- 70 Mbits/s 802.11n WiFi connection (access point - same latency when using "ad hoc" WiFi and having additional troubles).

1/ My iPad 3 is connected to PC via WiFi (latency = 27 ms). PC and iPad in same private IPv4 network (192.168.1.0/24)

2/ Firewall is disabled :shock: during all tests made.

3/ No other apps are using ports 8000 to 8003. PC running Lemur Daemon for MIDI, Lemur app is running too on iPad 3. I don't use OSC for now (no OSC targets defined).

4/ From Lemur Editor, connected to iPad + syncho turned on. All are ok in Lemur Daemon (using two loopback virtual ports for MIDI In and Out, MIDI 0 on Lemur/Daemon).

5/ Creating new project from Editor, adding a "CustomButton" object (nothing altered, except its position/size), working as switch (as default).

When I change button state from iPad, the new state is fine on iPad (the most important IMO), but the state isn't reflected to Lemur Editor.
Same issue when set "Type" as "Pad" (instead of "Switch").

However, "Switches" object works fine (obviously it's a different object).

Where I'm wrong?

Same for Battery (good info on Lemur, always 100% on editor).

Any idea will be appreciated, many thanks in advance ! ;)

docam
Newbie
Posts:10
Joined:04 Feb 2017 18:39
Location:Chartres, France

Re: CustomButton state not reflected to Editor (Synchro on)

Post by docam » 16 Feb 2017 04:31

No replies ?

krevvy
Newbie
Posts:7
Joined:08 Feb 2017 20:01

Re: CustomButton state not reflected to Editor (Synchro on)

Post by krevvy » 17 Feb 2017 19:03

Can't help you... But hi!

Post Reply