i_Monomur_v3.1

Post your Lemur Projects.
Post Reply
Macciza
Regular
Posts:1325
Joined:07 Dec 2011 04:57
Location:Sydney, Australia.
i_Monomur_v3.1

Post by Macciza » 14 Dec 2011 04:39

Hi All,
Had a bit of a play with the Lemur Stretcher and ended up converting the Monemur project . . .
The App did pretty well convertin the overall layout but needed a bit of tweaking with things that were dealt with programmatically.

Anyway heres a beta iPad Monemur patch for people to check out . . .
Would be good to do an RGB version at some point I suppose . .

Cheers
MM
©2013 Macciza. CC BY-NC-SA Attribution-NonCommercial-ShareAlike
Attachments
i_monemur_v3_1b.jzml.zip
iPad Monemur v3.1b
(3.32KiB)Downloaded 358 times
iMac 2.8G i7 12G 10.6.8/10.7.2, Legacy Dexter/Lemur, Liine Lemur/iPad2, KMI SoftStep, 12Step & QuNeo , B-Controls, Mackie C4 etc
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]

vicbit
Newbie
Posts:8
Joined:14 Dec 2011 10:52

Re: i_Monomur_v3.1

Post by vicbit » 14 Dec 2011 10:54

Need to update de max patch? the monome apps works but don´t receive feedback led;(

dimi
Newbie
Posts:12
Joined:08 Dec 2011 00:41

Re: i_Monomur_v3.1

Post by dimi » 14 Dec 2011 15:00

this works very well! ipad2, ableton live 8.2.6, osx 7.2
Maybe it didn't work for you if you havent set the proper port at the lemur app 7999 (check the rtf help file within the monomur3.1 download package) or your Ipad's ip in the max patch.

Macciza, do you think this can be combined with other templates, such as the mu? If so, can you give me some pointers?

Warm regards
dimi

protocol
Newbie
Posts:33
Joined:08 Dec 2011 03:05

Re: i_Monomur_v3.1

Post by protocol » 14 Dec 2011 15:26

@ diml

I did a similar thing with my nordlead2x patch. I have details inside on how to install. you'd have to do something similar to this. Basically how it might work is it loads when you open the device in an A or B slot.

You have to do a few things:

1) For each object/parameter in your jzml, make sure you copy the "Mu.lemuClient /oscmess/x -- " file contained in the m4l device and change the /oscmess in that box to the associated osc message in your jzml template.
2) save the jzml as a jzlib instead.
3) put the jzlib in the associated pathway inside the max directory. to illistrate this i'll use the nordlead mu patch i designed below:

a basic over view from my patch is this:
Installation:
1) Copy NordLead2x folder into directory:
Mu/Resources/DeviceControllers/MIDI Effects/Max MIDI Effect
2) Take NordLead2x_v2.amxd and open in Ableton Live under:
MIDI Effects, Max MIDI Effects

You just need to make sure the template is in the directory for Mu (as seen above) (and is a jzml), make sure the is in the M4L patch the "mu.lemurclient blah blah blah" for each parameter you are changing, and that the Mu patch is in the same directory as the jzml path (so mu nows where to look).

hope that helps, give it a try, if you have issues let me know.
- protocol

vicbit
Newbie
Posts:8
Joined:14 Dec 2011 10:52

Re: i_Monomur_v3.1

Post by vicbit » 14 Dec 2011 16:10

dimi wrote:this works very well! ipad2, ableton live 8.2.6, osx 7.2
Maybe it didn't work for you if you havent set the proper port at the lemur app 7999 (check the rtf help file within the monomur3.1 download package) or your Ipad's ip in the max patch.

Warm regards
dimi
Still no feedback led,I´m trying to use polygome and I have the 7999 port in lemur osc target 0 and ip 192.168.0.192 (computer ip). I put 192.168.0.100 (ipad ip) in the max patch and the apps works but no feedback leds in the ipad... weird;(
the max patch don´t receive prefix messages from polygome

vicbit
Newbie
Posts:8
Joined:14 Dec 2011 10:52

Re: i_Monomur_v3.1

Post by vicbit » 14 Dec 2011 19:23

now works!! I also have a monome gs64 and monomeserial open, when i close monomeserial all works fine;)

ChrisHahn
Newbie
Posts:1
Joined:06 Jan 2012 17:25

Re: i_Monomur_v3.1

Post by ChrisHahn » 06 Jan 2012 20:23

Does anyone know what it would take to get this working with the new Monome apps that user SerialOSC?

Post Reply