Midi Control Surface
Installed everything as directed but "LiveControl_TO" doesn't show up in my control surfaces list. I can see LiveControl 1 and 2 under input and output and under the MIDI ports as well. Am I missing something?
Re: Midi Control Surface
Forgot the specs: running Ableton Live 8.2 on Mac OSX 10.6, if that helps
-
- Regular
- Posts:83
- Joined:04 Oct 2010 12:26
Re: Midi Control Surface
you've run the installer.jar right? make sure youve got the latest version off the site. previous versions sometimes didnt have write permission to the ableton folder, which it needs to install the remote script.
Re: Midi Control Surface
I've got the same problem ! (and I think I've used the latest software version...)
I had some problems during the script installation, a message appeared : "The directory already exists ! Are you sure you want to install here and possibly overwrite existing files ?"
I've finally tried the installation without success.
I've decided to uninstall Live control using the IZpack uninstaller and it uninstall every single application on my computer except those who came with OSX (itunes, mail are OK).
I had some problems during the script installation, a message appeared : "The directory already exists ! Are you sure you want to install here and possibly overwrite existing files ?"
I've finally tried the installation without success.
I've decided to uninstall Live control using the IZpack uninstaller and it uninstall every single application on my computer except those who came with OSX (itunes, mail are OK).
Re: Midi Control Surface
I figured it out! I had Live on my desktop while its folder was still in "Applications." I installed LiveControl into the Applications folder without realizing that Live had to be in there too in order for it to work. Seems kinda silly now. Thanks for your help!
Re: Midi Control Surface
OK, it's all right for me too...
Re: Midi Control Surface
Dear fellow LiveControl users and ST8 if u are out there!?!
I have just attempted to get LiveControl working with my iphone4 and Macbook (model- 2,1?).
I have followed the install and set up instructions closely and have the layout on the phone in TouchOsc.
My problem is that Ableton-Live isn't listing LiveControl as a Control surface in the control surface list.
It does however have "LiveControl" "1" & "2" listed in both midi in and outs.
So i'm stumped but so close it seems!!
Well i cant wait to start with Live control it surely appears to be the most comprehensive patch in TouchOsc for use with Live thus far!
THANKS ST8!!!!!! looking forward to utilising this stealth looking tool
I just hope i can conquer this massive leaning curve im on!
Hope to hear from you soon
Cheers Jaeebz
I have just attempted to get LiveControl working with my iphone4 and Macbook (model- 2,1?).
I have followed the install and set up instructions closely and have the layout on the phone in TouchOsc.
My problem is that Ableton-Live isn't listing LiveControl as a Control surface in the control surface list.
It does however have "LiveControl" "1" & "2" listed in both midi in and outs.
So i'm stumped but so close it seems!!
Well i cant wait to start with Live control it surely appears to be the most comprehensive patch in TouchOsc for use with Live thus far!
THANKS ST8!!!!!! looking forward to utilising this stealth looking tool
I just hope i can conquer this massive leaning curve im on!
Hope to hear from you soon
Cheers Jaeebz
-
- Regular
- Posts:83
- Joined:04 Oct 2010 12:26
Re: Midi Control Surface
did you select the correct folder when running the installer.jar? If LiveControl is not listed in the midi remote scripts then something went wrong with the jar installerjaeebz wrote:Dear fellow LiveControl users and ST8 if u are out there!?!
I have just attempted to get LiveControl working with my iphone4 and Macbook (model- 2,1?).
I have followed the install and set up instructions closely and have the layout on the phone in TouchOsc.
My problem is that Ableton-Live isn't listing LiveControl as a Control surface in the control surface list.
It does however have "LiveControl" "1" & "2" listed in both midi in and outs.
So i'm stumped but so close it seems!!
Well i cant wait to start with Live control it surely appears to be the most comprehensive patch in TouchOsc for use with Live thus far!
THANKS ST8!!!!!! looking forward to utilising this stealth looking tool
I just hope i can conquer this massive leaning curve im on!
Hope to hear from you soon
Cheers Jaeebz
Re: Midi Control Surface
Hi St8!
yes I installed the LiveControl inst. Jar into the live directory and i also made sure that the LiveControl app and the live app were both in the applications folder.
Now i want to uninstall and try again but I'm worried that I will loose live as when I went to use the provided uninstaller it was going to uninstall live 8.1 etc.. Can I just try the install again without uninstalling the LiveControl components? Also I am having massive trouble trying to set up an ad hoc network on my Mac. I have followed all the steps and tried countless variations of password usage, network preference settings & Internet sharing settings etc. There appear to be hundreds of Mac users who are experiencing the same difficulty and it has been concluded by most that it is a snow leopard phenomenon.. This means I can't get Griid working, nor any othr osc based formats.
I have updated software, researched other fixes and searched relentlessly to find patches for my:
Airport extreme (0x168C, 087) card; Atheros 5416: 2.0.19.10 firmware; 802.11 a/b/g/n interface.
I did find an apple update called Airport client update 2009 002 which apple state will fix this problem but my system would not allow me to install it???
So im pretty stuffed! Seems ill be doing quite a bit of learning to conquer my mac issues... Considering going to university for this, might make it a bit easier!!! Anyway, any ideas would be very gratefully appreciated!! I am itching to start using livecontrol!
Thanks again Jaeebz
yes I installed the LiveControl inst. Jar into the live directory and i also made sure that the LiveControl app and the live app were both in the applications folder.
Now i want to uninstall and try again but I'm worried that I will loose live as when I went to use the provided uninstaller it was going to uninstall live 8.1 etc.. Can I just try the install again without uninstalling the LiveControl components? Also I am having massive trouble trying to set up an ad hoc network on my Mac. I have followed all the steps and tried countless variations of password usage, network preference settings & Internet sharing settings etc. There appear to be hundreds of Mac users who are experiencing the same difficulty and it has been concluded by most that it is a snow leopard phenomenon.. This means I can't get Griid working, nor any othr osc based formats.
I have updated software, researched other fixes and searched relentlessly to find patches for my:
Airport extreme (0x168C, 087) card; Atheros 5416: 2.0.19.10 firmware; 802.11 a/b/g/n interface.
I did find an apple update called Airport client update 2009 002 which apple state will fix this problem but my system would not allow me to install it???
So im pretty stuffed! Seems ill be doing quite a bit of learning to conquer my mac issues... Considering going to university for this, might make it a bit easier!!! Anyway, any ideas would be very gratefully appreciated!! I am itching to start using livecontrol!
Thanks again Jaeebz
-
- Regular
- Posts:83
- Joined:04 Oct 2010 12:26
Re: Midi Control Surface
Have you moved Live.app out of the Live x.x.x folder? that might be your problem, the jar installer installs the midi remote scripts into Live.app/Contents/App-Resources/MIDI Remote Scripts. If you've moved the app the installer probably cant find the right folderjaeebz wrote:Hi St8!
yes I installed the LiveControl inst. Jar into the live directory and i also made sure that the LiveControl app and the live app were both in the applications folder.
Now i want to uninstall and try again but I'm worried that I will loose live as when I went to use the provided uninstaller it was going to uninstall live 8.1 etc.. Can I just try the install again without uninstalling the LiveControl components? Also I am having massive trouble trying to set up an ad hoc network on my Mac. I have followed all the steps and tried countless variations of password usage, network preference settings & Internet sharing settings etc. There appear to be hundreds of Mac users who are experiencing the same difficulty and it has been concluded by most that it is a snow leopard phenomenon.. This means I can't get Griid working, nor any othr osc based formats.
I have updated software, researched other fixes and searched relentlessly to find patches for my:
Airport extreme (0x168C, 087) card; Atheros 5416: 2.0.19.10 firmware; 802.11 a/b/g/n interface.
I did find an apple update called Airport client update 2009 002 which apple state will fix this problem but my system would not allow me to install it???
So im pretty stuffed! Seems ill be doing quite a bit of learning to conquer my mac issues... Considering going to university for this, might make it a bit easier!!! Anyway, any ideas would be very gratefully appreciated!! I am itching to start using livecontrol!
Thanks again Jaeebz