Page 1 of 1

VCV

Posted: 06 Nov 2017 04:35
by Phil999
this is just a simple controller for VCV with 8 MIDI CC's.

Image

Re: VCV

Posted: 30 Nov 2017 17:39
by Phil999
since there are many logic and sequencer modules with switch input, I added 8 switches.

Image

The following picture shows how this template can be used for a submixer. The top 4 buttons act as mute buttons, knob 8 as master volume. I find this basic setup useful for testing new modules.

Image

And if these 8 buttons and 8 knobs are not enough, there are two additional identical pages or interfaces. Each one, obviously, uses one MIDI channel, so you can continue using Lemur port 0 for all three interfaces.