VCV

Post your Lemur Projects.
Post Reply
Phil999
Regular
Posts:932
Joined:11 Jan 2012 01:53
VCV

Post by Phil999 » 06 Nov 2017 04:35

this is just a simple controller for VCV with 8 MIDI CC's.

Image
Attachments
VCV.zip
(7.87KiB)Downloaded 253 times
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro

Phil999
Regular
Posts:932
Joined:11 Jan 2012 01:53

Re: VCV

Post by Phil999 » 30 Nov 2017 17:39

since there are many logic and sequencer modules with switch input, I added 8 switches.

Image

The following picture shows how this template can be used for a submixer. The top 4 buttons act as mute buttons, knob 8 as master volume. I find this basic setup useful for testing new modules.

Image

And if these 8 buttons and 8 knobs are not enough, there are two additional identical pages or interfaces. Each one, obviously, uses one MIDI channel, so you can continue using Lemur port 0 for all three interfaces.
Attachments
VCV3.zip
(21.67KiB)Downloaded 276 times
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro

Post Reply