MPD32

Post your Lemur Projects.

MPD32

Postby phase_change » 11 Dec 2016 05:40

This is the official MPD32 project post. This is a good place to ask me questions and make suggestions for features I can add. If you find a bug, report it here so I can fix it.
Have you tried turning it off and on again?
phase_change
Regular
 
Posts: 89
Joined: 31 May 2015 18:45
Location: Austin, TX

Re: MPD32

Postby bakimator » 26 Jan 2017 15:17

Hello,

Thanks for this template! I'm a french user, my english is not perfect... sorry ^^

I use ableton live 9.7 and Lemur APP.
For midi virtual port I use LoopMidi (https://www.tobias-erichsen.de/software/loopmidi.html)

I have some problems with this template :

I open MPD32enginev1.0.maxpat with max ==> OK, then I configure "midi in" to "loopMIDI port 1" and "midi out" to "loopMIDI port 2"

In second time I open Lemur editor and sync with the template MPD32v1.0.jzml.

In ableton live the pad works but the button play/stop/rec doesn't work.

The button note repeat send a note C-2.....

In ableton I configure my midi preference like :

Surface control = MPD32 midiIN: LoopMIDI port 1 midiOUT : LoopMIDI port 2

Do you have an explication? maybe my configuration is bad...
bakimator
Newbie
 
Posts: 2
Joined: 26 Jan 2017 14:41

Re: MPD32

Postby phase_change » 28 Jan 2017 21:32

Let me take a look at this when I can. I think my original intention was to have you map the transport buttons yourself. Maybe I screwed something up, tho.
Have you tried turning it off and on again?
phase_change
Regular
 
Posts: 89
Joined: 31 May 2015 18:45
Location: Austin, TX

Re: MPD32

Postby phase_change » 28 Jan 2017 22:28

Looking back over what you wrote - don't use the remote script for MPD32 - it's not compatible with the module I built. This template is using midi, sending midi out to Max, using some gates for the note repeat part, and if note repeat is not engaged, passing midi from max to your daw or synth.
Have you tried turning it off and on again?
phase_change
Regular
 
Posts: 89
Joined: 31 May 2015 18:45
Location: Austin, TX


Return to Projects

Who is online

Users browsing this forum: No registered users and 2 guests

cron