Lemur and Behringer X32

Discuss Lemur and share techniques.
Joe Soap
Regular
Posts:475
Joined:07 Jul 2012 15:04
Re: Lemur and Behringer X32

Post by Joe Soap » 27 May 2014 03:14

@ Macciza: No worries dude, at least it gave you an excuse to bust out the ubiquitous elipsis eh? :D.

@ Prokat99: I can address / control my RME Fireface using the template from the User Lib over OSC with no problems whatsoever - in fact I was surprised at how straightforward it was - just loaded the template, pointed the OSC Target at the IP specified and Bob's yer Auntie's transgender 'friend'.

Prokat99
Newbie
Posts:42
Joined:26 Dec 2012 05:03

Re: Lemur and Behringer X32

Post by Prokat99 » 27 May 2014 04:04

The only other possibility I can think of is my wifi router. I will have to test with another and see what happens.
TO working perfect doesn't make sense though. I guess I will keep at it.

Macciza
Regular
Posts:1325
Joined:07 Dec 2011 04:57
Location:Sydney, Australia.

Re: Lemur and Behringer X32

Post by Macciza » 27 May 2014 04:55

Hi
It must be an addressing issue because I can get both to work sending Max on my Mac . . .

So in TO I guess you are seeing the X32 as a 'Found Host' and selecting it;
What IP address shows upon the Host field at the top? e.g. 192.168.0.100
Port field is then set to 10023.

In Lemur you would set say OSC 0 Target to Host: 192.168.0.100 Port: 10023
Then set Fader up using OSC 0 as Target for x value
OSC panel.tiff
OSC panel.tiff (19.43KiB)Viewed 1299 times
Make sure the x variable is ticked (default) in the project hierarchy panel

Both of these setups should send the same thing to the same place.
iMac 2.8G i7 12G 10.6.8/10.7.2, Legacy Dexter/Lemur, Liine Lemur/iPad2, KMI SoftStep, 12Step & QuNeo , B-Controls, Mackie C4 etc
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]

Post Reply